Skip to the documents
StalGuard PRO

Free printable templates

Free printable templates: NDT reports, WPS, WPQR, NCR, receiving card and coating claims

Fill the form in your browser or print a blank one and take it to the shop floor. Eleven documents in three languages (PL, EN, DE), laid out for clean A4 printing. No registration and no data sent to a server.

  • No registration
  • Data stays in your browser
  • PL · EN · DE
  • A4
A4 paper, 100% scale (no “fit to page”).

The templates are auxiliary and do not replace standards, company procedures or client requirements. The document must be completed and approved by qualified personnel (e.g. examiners per EN ISO 9712, welding coordination per EN ISO 14731).

Visual Testing Report (VT)

Visual testing of fusion-welded joints per EN ISO 17637 · acceptance criteria e.g. per EN ISO 5817

General data

Examination conditions and aids

Joint checklist

No. Feature examined OKNOKN/A Remarks
1Appearance and profile of weld face and root
2Weld dimensions (throat, reinforcement, width)
3Undercut
4Cracks
5Porosity and surface pores
6Lack of penetration / incompletely filled groove
7Spatter and arc strikes
8Misalignment of edges
9Cleanliness and surface condition after welding

Examination results

No. Weld no. / location Length [mm] Indications (type, size, position) AR Remarks

A – accepted (meets the acceptance criteria), R – rejected.

Overall result and signatures

Overall result of the examination

Examination carried out by

Approved by / welding supervision

Auxiliary template from stalguard.pl/en/free-templates – to be completed and approved by qualified personnel.

Magnetic Particle Testing Report (MT)

Magnetic particle testing per EN ISO 17638 · acceptance criteria e.g. per EN ISO 23278

General data

Technique and equipment

Demagnetisation after testing

Examination results

No. Weld no. / location Length [mm] Indications (type, size, position) AR Remarks

A – accepted (meets the acceptance criteria), R – rejected.

Overall result and signatures

Overall result of the examination

Examination carried out by

Approved by / welding supervision

Auxiliary template from stalguard.pl/en/free-templates – to be completed and approved by qualified personnel.

Ultrasonic Testing Report (UT)

Ultrasonic testing of welded joints per EN ISO 17640 · acceptance criteria e.g. per EN ISO 11666

General data

Instrument, probes and coupling

Examination results

No. Weld no. / location Length [mm] Depth [mm] Amplitude [dB / % DAC] Indication type AR Remarks

A – accepted (meets the acceptance criteria), R – rejected.

Overall result and signatures

Overall result of the examination

Examination carried out by

Approved by / welding supervision

Auxiliary template from stalguard.pl/en/free-templates – to be completed and approved by qualified personnel.

Penetrant Testing Report (PT)

Penetrant testing per EN ISO 3452-1 · acceptance criteria e.g. per EN ISO 23277

General data

Product system and parameters

Penetrant type
Excess removal method (A, B, C, D)

A – water-washable, B – lipophilic emulsifier, C – solvent, D – hydrophilic emulsifier

Developer form (a, b, c, d, e per EN ISO 3452-1)

Examination results

No. Weld no. / location Length [mm] Indications (type, size, position) AR Remarks

A – accepted (meets the acceptance criteria), R – rejected.

Overall result and signatures

Overall result of the examination

Examination carried out by

Approved by / welding supervision

Auxiliary template from stalguard.pl/en/free-templates – to be completed and approved by qualified personnel.

Radiographic Testing Report (RT)

Radiographic testing of welded joints per EN ISO 17636-1 (film) and -2 (digital detectors) · acceptance criteria e.g. per EN ISO 10675-1

General data

Technique and radiation source

Radiographic technique class

Examination results

No. Weld no. / location Length [mm] Indications (type, size, position) AR Remarks

A – accepted (meets the acceptance criteria), R – rejected.

Overall result and signatures

Overall result of the examination

Examination carried out by

Approved by / welding supervision

Auxiliary template from stalguard.pl/en/free-templates – to be completed and approved by qualified personnel.

Welding Procedure Specification (WPS)

per EN ISO 15609-1 · procedure qualification per EN ISO 15614-1 · heat input per EN 1011-1

Identification

Parent material and joint

Joint sketch and run sequence

Process and filler materials

Welding parameters

Q = k·U·I / (v·1000) [kJ/mm]. Per EN 1011-1: processes 111, 131, 135, 136, 138 – k = 0.8; 121 – k = 1.0; 141 – k = 0.6.

Run Process Wire / electrode Ø [mm] Current I [A] Voltage U [V] Current / polarity Travel speed v [mm/s] Heat input Q [kJ/mm]

Thermal requirements and technique

Calculate the preheat temperature (CET, method B) in the calculator →

Signatures

Prepared by

Approved by / welding supervision

Auxiliary template from stalguard.pl/en/free-templates – to be completed and approved by qualified personnel.

Welding Procedure Qualification Record (WPQR)

Qualification of arc welding procedures for steel per EN ISO 15614-1 · preliminary WPS (pWPS) per EN ISO 15609-1

Identification

Test piece parameters

Tests and results

No. Test Test standard Requirement Result AR
1Visual testing (VT)EN ISO 17637
2Radiographic or ultrasonic testing (RT / UT)EN ISO 17636-1 / 17640
3Surface testing (MT or PT)EN ISO 17638 / 3452-1
4Transverse tensile testEN ISO 4136
5Bend testEN ISO 5173
6Impact test (KV, test temperature)EN ISO 9016
7Hardness testEN ISO 9015-1
8Macroscopic (and microscopic) examinationEN ISO 17639

A – accepted (meets the acceptance criteria), R – rejected.

Range of qualification

It is certified that the test pieces were welded and tested in accordance with the requirements of the standard. Result of the procedure qualification:

Examiner / examining body

Approved by / welding supervision

Auxiliary template from stalguard.pl/en/free-templates – to be completed and approved by qualified personnel.

Non-Conformance Report (NCR)

Record of the non-conformity and corrective actions in the quality system (e.g. EN ISO 9001, EN ISO 3834, EN 1090-1)

Report details

Stage of detection

Description of the non-conformity

Classification and handling of the product

Classification
Disposition of the product

Root cause and corrective actions

NCR status

Signatures

Reported by

Quality control / welding supervision

Approved by (management / client)

Auxiliary template from stalguard.pl/en/free-templates – to be completed and approved by qualified personnel.

Material Receiving Card (PZ)

Delivery acceptance and traceability of products per EN 1090-2 (clauses 5.2 and 5.6) · inspection documents per EN 10204

Delivery

Items received

No. Product (section, dimensions) Grade (standard) Heat no. Inspection document (type, no.) Quantity / mass OKNOK Remarks

Receiving inspection

No. Feature examined OKNOKN/A Remarks
1Quantity and assortment match the delivery document
2Visual condition and dimensions (damage, corrosion, distortion)
3Product marking (grade, heat no.) legible and consistent with the document
4Inspection document complete (type required for the EXC class) and matching the order
5Chemical composition and mechanical properties comply with the product standard
6Traceability marker assigned (label, QR code, internal number)

Decision and signatures

Decision

Received by (warehouse)

Quality control

StalGuard PRO keeps the receiving register and issues the Material Receiving Card from certificates automatically: order a free TRIAL →

Auxiliary template from stalguard.pl/en/free-templates – to be completed and approved by qualified personnel.

Zinc Coating Claim

Hot-dip galvanizing per EN ISO 1461 · electroplated zinc per EN ISO 2081 · thermal spray metallizing per EN ISO 2063-1/-2 · system selection per EN ISO 14713

Coating type (choose)

Choose the coating type above to see the fields for it.

Claimant and coating contractor

Hot-dip galvanizing: data and defects (EN ISO 1461)

Defects found

Electroplated zinc: data and defects (EN ISO 2081)

Hydrogen relief baking (high-strength steel)
Defects found

Thermal spray metallizing: data and defects (EN ISO 2063)

Defects found

Description of the defect and measurements

No. Measurement location Required thickness [µm] Measured thickness [µm] Method / instrument Remarks

Attachments and requested resolution

Attachments
Requested resolution

Claimant

Claim received by (coating contractor)

Auxiliary template from stalguard.pl/en/free-templates – to be completed and approved by qualified personnel.

Paint Coating Claim

Paint systems per EN ISO 12944 · adhesion per EN ISO 4624 / EN ISO 2409 · film thickness per EN ISO 2808 · powder coatings on galvanized steel per EN 13438

Painting technique (choose)

Choose the painting technique above to see the fields for it.

Claimant and coating contractor

Paint system and application conditions

Wet paint application: data and defects

Defects found

Spray painting: data and defects

Defects found

Powder coating: data and defects

Defects found

Description of the defect and measurements

No. Measurement location Required thickness [µm] Measured thickness [µm] Method / instrument Remarks

Attachments and requested resolution

Attachments
Requested resolution

Claimant

Claim received by (coating contractor)

Auxiliary template from stalguard.pl/en/free-templates – to be completed and approved by qualified personnel.

Document details

What each document is for

Visual testing (VT)

A checklist of surface imperfections of a welded joint (cracks, undercut, porosity, misalignment) with a results table. Basis: EN ISO 17637; acceptance criteria most often per EN ISO 5817.

Magnetic particle testing (MT)

A report with magnetisation parameters, detection medium and lighting, plus an indications table. Basis: EN ISO 17638; acceptance criteria per EN ISO 23278.

Ultrasonic testing (UT)

A report with instrument, probes, calibration block and testing level, plus an indications table (depth, amplitude, length). Basis: EN ISO 17640; acceptance criteria per EN ISO 11666.

Penetrant testing (PT)

A report with the penetrant system, penetration and development times, plus an indications table. Basis: EN ISO 3452-1; acceptance criteria per EN ISO 23277.

Welding procedure specification (WPS)

A WPS card with parent material, joint, filler materials, run parameters (with automatic heat input calculation) and thermal requirements. Basis: EN ISO 15609-1; qualification per EN ISO 15614-1.

Radiographic testing (RT)

A report with radiation source, technique, film or detector, image quality indicator and image evaluation parameters, plus an indications table. Basis: EN ISO 17636-1 and -2; acceptance criteria per EN ISO 10675-1.

Welding procedure qualification record (WPQR)

A record with test piece parameters, destructive and non-destructive test results (VT, RT/UT, MT/PT, tensile, bend, impact, hardness, macro) and the range of qualification. Basis: EN ISO 15614-1.

Non-conformance report (NCR)

A record of the non-conformity with classification, disposition of the product, root cause analysis, corrective and preventive actions and verification of effectiveness.

Material receiving card (PZ)

Delivery acceptance: items with grade, heat number and inspection document, receiving checklist and the decision to release or hold (NCR). Basis: EN 1090-2 (traceability), EN 10204.

Zinc coating claim

A claim form with a choice of coating type: hot-dip galvanizing (EN ISO 1461), electroplated zinc (EN ISO 2081) or thermal spray metallizing (EN ISO 2063): fields and defects matched to the chosen type, plus a thickness measurement table.

Paint coating claim

A claim form with a choice of technique: wet paint application, spray painting or powder coating: fields and defects matched to the technique, paint system per EN ISO 12944, plus a thickness measurement table.

How to use it

  1. Choose a document in the tabs above the form.
  2. Fill in the fields in the browser, or leave them empty and print the form to fill in with a pen.
  3. Click “Print”: only the selected document is printed, in a clean A4 layout.

The templates run only in your browser: the values you enter are neither sent to any server nor stored. They disappear when you close the tab.

Filling this in by hand from every certificate?

StalGuard PRO reads 3.1 certificates, calculates CEV/CET and prepares the NDT report and WPS card from the register: you only add the examination results.

Supplier / System information

A system for steel fabricators covered by FPC per EN 1090-1/-2 (EXC1–EXC4) and welding quality requirements per EN ISO 3834.

Supplier: Marek Nowicki (natural person), ul. Henryka Sienkiewicza 14/2, 62-069 Dąbrowa. Payments are processed by Paddle (Merchant of Record).

© 2026 StalGuard PRO

Terms and Refund Policy

Privacy policy / GDPR

Data controller and website visits. The controller of data processed in connection with the website, contact and the licence is Marek Nowicki (natural person), ul. Henryka Sienkiewicza 14/2, 62-069 Dąbrowa (contact: kontakt@stalguard.pl). The website does not load analytics or advertising tools. When it opens, your browser loads the Paddle script (cdn.paddle.com) and asks Paddle for prices for your country, so Paddle receives your IP address and technical browser data even if you do not buy; Paddle may also store its own cookies or local storage (e.g. to prevent abuse). You have the right of access, rectification, erasure, restriction and objection, and to lodge a complaint with the supervisory authority; send requests to the contact address.